Seaward PrimeTest 50 Instructions d'exploitation télécharger pdf (Page 38)

PrimeTest 250

Operating Instructions

4.4 Transferring Test Results

Test data can be transferred to a PC using the

Datalogger on the provided PT250

Support CD.

Insert the CD into your disc drive and then view the

InstallationInstructions.txt ﬁ le for information on

how to install.

Once the USB drivers and Datalogger are installed

you can open the Datalogger program from your

desktop.

Connect your device to the PC using a USB

connector. (The very ﬁ rst time you do this, your PC

will automatically install a COM port driver). You can

check which COM port is being used by looking in

the Device manager.

E.g.: Silicon Labs CP210x USB to UART

Bridge(COM14)

Select the correct COM port.

Click on Download. A progress bar will appear.

On the PrimeTest 250

in order to transfer the entire

test storage area to PC press and hold the RECALL

key for 5 seconds. The data will be transmitted

using the USB interface.

When all data has been captured and stored the

progress bar will disappear and you will be asked

where to save the data.

Once the ﬁ le is saved you may click the “Open”

button to open the document with default

application.

For example, if you saved the ﬁ le in .csv format

(the default) then it may open using a spreadsheet

application.

4.5 Printing Test Results

In order to print a test label press the PRINT Key

when the test sequence has been completed or

when the test result is being reviewed. The printer

must be attached before the PRINT Key is pressed.

In order to save power the PrimeTest 250

will turn

the printer on and off when required.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Seaward PrimeTest 50 Instructions d'exploitation Page 38

Commentaires sur ces manuels

Produits connexes et manuels pour Chargeurs de batterie Seaward PrimeTest 50